Sunshine Coast

102170 – Granite 05/07/2024

small update to change ground markings to arrows instead of custom drawn poygons

100909 – Granite 02/20/2024

Fixed misaligned taxiway.

100777 – Granite 02/12/2024

Small update to remove safety areas and replace with zebra.lin

99715 – Granite 12/11/2023

INterim update for new RPT apron with the addition of Bays 19A and 20A. They are slightly displaced from leadin lines however once I get photos in a couple of weeks I should be able to rectify. Also updated most buildings to XP12 art assets and a few general tidyups on aprons etc. Further update to come soon. Enjoy.

99604 – AirWombat 12/02/2023

Minor adjustments to taxiway texture headings to match runway heading, minor adjustments to markings and lines to reduce number of nodes, replaced walkway markings with safety zone to reduce number of draped polygons, replaced hangars with XP12 versions

99559 – Granite 11/27/2023

Updated YBSU to add new RPT apron stands 19 and 20 and taxiways B3 and M which become operational 30 November 2023.This has been done using photos taken recently as well as AIP data. The apron layout and markings cannot yet be verified until new ESRI imagery available or better photos are available. Ive duplicated existing ramp markings etc as an interim measure which should be close to real. Also a few minor updates (such as getting rid of a huge poly I must have left on the apron last update.

95490 – Granite 04/26/2023

Replaced access roads as suggested. It is not always possible to use the dark_5M.lin as parts of th eroads lie on taxiways and adjoining polys.

94845 – Granite 03/28/2023

Removed assest outside airport boundary

94394 – Granite 03/10/2023

Fixed Ramp Start airlines error. Added drain across end of RPT apron.

94138 – Granite 02/17/2023

Update to YBSU for XP12. Adjusted RWY using Displaced Threshold facility, reduced Exclusion Zones to absolute, adjusted tree placement and re-aligned several pieces of taxiways and markings to better fit topography.

85435 – CatonaPC 07/08/2021

Added taxi routes fpr live traffic plugins, Consequently removed three hold-short start positions. Removed irrelevent UA commuter het object,

85399 – Granite 07/07/2021

Small update to include distance to run sign threshold RW31, changed rotating beacon type, added a little more to the Southern Industrial area. Enjoy.

85131 – Granite 06/23/2021

Major update June 2012 to reflect current runways, taxiways, aprons and terminal. Majority of the landside was already in place so credit goes to previous authors. Some work has been done on hangars and buildings to better reflect actual buildings. The taxiways and aprons now very closely reflect the current situation. The satellite data is still behind. Apron data is from photos taken by the author on the tarmac in May 2021. The runway markings do not accurately reflect current markings. There are no LR library runway markings which are the same as some Australain runway markings. Hence the US precision markings have been used. Many taxiways were removed and replaced with polygons (taxiways under buildings etc) Apron markings have been reproduced as faithfully as possible however given the limits of the rendering engine, some apron markings are much bigger than actual size (Aircraft type markings on lead in parking lines) The terminal has been redone to better reflect actual look. Again due to limitations of the LR library the terminal building is still very simplistic. Static elements have been included to better refelct actual situation. No Ramp starts (apart from Ramp 1) have static aircraft.

83219 – Litjan 03/09/2021

Major emergency fix - implemented new runway, turned old one into taxiway. Further work can be done when new sat imagery available. Removed hopelessly complex airport flow and taxi routes. Turned MANY taxiways into pavement (only use taxiways for actual aircraft movement areas, not for roads etc!!). For now this airport is usable and conforms to validation.

57493 – mjrhealth 01/02/2018

Its that darn selection tool quiet often when using it you select thing you cant see than some how make multiple copies and it doesnt show up because they are right underneath one another. Only way i know to check for mutilpe parking is to show all the parking on right sreen than select each one and see if it show up in multiple positions than delete what i dont want.

57371 – mjrhealth 12/30/2017

Fixed multiplee parking found quick way to check, well sort of quick

57227 – mjrhealth 12/26/2017

3d Updated terminal, ground marking, traffic flow, tower etc allows cross wind to 15kts ga

52884 – mjrhealth 06/10/2017

Updated with RC1 WED

52776 – mjrhealth 06/04/2017

Has some added autogen trees in carpark. I think some of your vehiclees need texture updates. Can yopu please confrim ATIS i bin having issues with it lately

43260 – broberts5421229 03/05/2016

(No comment)

43259 – broberts5421229 03/05/2016

(No comment)

34357 – WEDbot 01/17/2015

Airport upload from X-Plane 10.32's default apt.dat

1914 – broberts5421229 12/16/2014

(No comment)