Marseille Provence

Identifier in X-Plane LFML
Full nameMarseille Provence
Country France
Datum Coordinates (lat, lon) 43.43700, 5.21400 open in Google Maps
Elevation (Not specified)
Recommended Scenery Pack 105984 by Peter Günnewig submitted on March 13, 2025
Attributes
  • Terrain Mesh Missing or Compromised

Checkout status

This airport is unclaimed. You can lock the airport to announce to the world that you’re working on it and prevent duplicate work from being submitted.

map
Previous Next
  • 105984 – peterg 03/13/2025
    Added Taxi Routes for Ground Trucks for better Airport Flow
    Approved Recommended
  • 104099 – Andrew_Boyarsky 10/18/2024
    Airport overhaul
    Approved
  • 101438 – Litjan 03/21/2024
    Fixed runway end 13L, it is correct, despite the warning during validation (it is just a warning, no error, compare sat pic if needed).Fixed up validation errors and remove custom road to fix up the last rejected submission.
    Approved
  • 95578 – FlynBrian 04/28/2023
    (No comment)
    See comments
  • 95262 – FlynBrian 04/14/2023
    Removed all exclusion zones
    See comments
  • 94879 – FlynBrian 03/29/2023
    Removed validation errors and added a seaplane ramp into the water
    See comments
  • 86185 – flyingpauls 08/25/2021
    I noticed that the night flow is not working. The time rule seems to be ignored. So, I deleted this rule.
    Approved
  • 86121 – flyingpauls 08/22/2021
    Fixed the PAPI lights 31L and 31R to 4 degrees.
    See comments
  • 85853 – flyingpauls 08/04/2021
    Okay, fixed the taxi routes to lonely ramp starts.
    Approved
  • 85776 – flyingpauls 07/29/2021
    Added working PAPI lights.
    See comments
  • 82920 – Litjan 02/27/2021
    Fixed worst authoring issues: Changed taxiways to only be in airplane movment areas, not industrial lots, etc. Changed many illegal taxiways to pavement. Broke up terminal on sloping terrain to fix floating roof structures. Removed abusive draped signs to emulate taxi hatches, started placind taxi_hatch.lin instead. Fixed runway validation, to be refined when CIFP data catches up.
    Approved
  • 81466 – flyingpauls 12/07/2020
    Finished the work of Pepel81. Fixed the threshold for 13L ignoring the CIFP data. Fixed the runway/taxiway transitions. Fixed the floating roof elements. Added buildings in front.
    Approved
  • 76718 – Pepel81 04/22/2020
    Replaced a lot of objects which was not at the correct place.Add blue lights missing on taxiway.
    See comments
  • 76693 – Pepel81 04/21/2020
    Modification apron light...
    See comments
  • 76688 – Pepel81 04/21/2020
    If someone could test ILS. Thanks
    See comments
  • 76623 – Pepel81 04/18/2020
    Positioning runways at the correct place.Align navaids ILS with tutorial from Jan Vogel.
    See comments
  • 76562 – Pepel81 04/16/2020
    Adding gates numbers to the ground, markings.Delete somes nodes.
    See comments
  • 76246 – Pepel81 04/08/2020
    Cosmetic safety zones red. Added gates missing (WIP) Progression of triangles yellow and marking. All the adjustements are made with Geotiff (ortho4xp) sat:Mapbox 2019.
    See comments
  • 76202 – Pepel81 04/07/2020
    Test about triangles yellow and hierarchy pane about draped polygonsit is my first contribution and this scenery come from flyingpauls
    See comments
  • 75473 – flyingpauls 03/04/2020
    Had to fix the main building to work with unflattened airports.
    Approved
  • 75267 – flyingpauls 02/29/2020
    Fixed the frequencies. The runway 13R/31L is now closer to the localizer.
    See comments
  • 67886 – flyingpauls 05/01/2019
    Moved the ground vehicles behind buildings.
    Approved
  • 67604 – flyingpauls 04/19/2019
    Very sorry, but the flattening must stay on due to floating buildings. Sorry.
    See comments
  • 67602 – flyingpauls 04/19/2019
    Complied with the new CIFP data for 13L. To avoid lights on the taxiway, I had to use asphalt taxiway for the runway extension. Moreover, removed the always flatten flag.
    See comments
  • 67509 – flyingpauls 04/15/2019
    Fixed an issue with the taxi routes. Ai is now working better. CIFP data for 13L seems to be incorrect by 10m. I upload nevertheless.
    See comments
  • 66070 – flyingpauls 02/09/2019
    Added missing PAPI 13L.
    Approved
  • 66047 – flyingpauls 02/08/2019
    Fixed the remaining taxiway/runway transition problems (hopefully).
    See comments
  • 65816 – flyingpauls 01/27/2019
    According to user request: Obstracting ramp start resized. Added ground marking to avoid taxi error on G3.
    See comments
  • 65740 – flyingpauls 01/24/2019
    Turned the runway guard lights around. Sorry about this mishap.
    See comments
  • 65732 – flyingpauls 01/24/2019
    Fixed the jetways. Also aligned some taxiways. Added more signs to help taxiing.
    See comments
  • 65718 – flyingpauls 01/23/2019
    New version of LFML Marseille.
    See comments
  • 64881 – flyingpauls 12/21/2018
    Fixed terrible flicker at the terminal building. Added exclusion zones.
    Approved
  • 63185 – Mathieu 09/19/2018
    Full review
    Approved
  • 59191 – Kkeith08 03/11/2018
    edited airport boundary
    See comments
  • 59055 – Kkeith08 03/05/2018
    Updated gates
    See comments
  • 58879 – Kkeith08 02/26/2018
    new update to gates
    See comments
  • 56728 – Kkeith08 12/03/2017
    fixed Helipads
    Approved
  • 56488 – Kkeith08 11/18/2017
    updated gates and fixed atc-taxi & flow and joine to RW 13R
    See comments
  • 56389 – Kkeith08 11/13/2017
    fixed over laping gates
    See comments
  • 56322 – Kkeith08 11/10/2017
    fixed airport boundary
    See comments
  • 56233 – Kkeith08 11/06/2017
    fixed Taxiways joining to run way
    See comments
  • 56140 – Kkeith08 11/01/2017
    (No comment)
    See comments
  • 50588 – WEDbot 02/16/2017
    Updated runway numbering and/or lengths to match Navigraph/Aerosoft data
    Approved
  • 49419 – WEDbot 02/16/2017
    Updated runway numbering and/or lengths to match Navigraph/Aerosoft data
    See comments
  • 47591 – WEDbot 02/15/2017
    Updated runway numbering and/or lengths to match Navigraph/Aerosoft data
    See comments
  • 20340 – WEDbot 01/17/2015
    Airport upload from X-Plane 10.32's default apt.dat
    Approved
  • 1359 – bsupnik2 10/19/2014
    This submission of the original apt.dat fixes taxiway C1-D9. The apt.dat original version (in xp1025 and 1030) contains self-intersecting bezier curves which cause the main taxiway to disappear.
    Approved

Note that this scenery can only be used in the X-Plane flight simulator. You can download the free demo to try it on your computer.