Identifier in X-Plane CYTZ
Full nameBilly Bishop Toronto City
Country Canada
Datum Coordinates (lat, lon) 43.63000, -79.39600 open in Google Maps
Elevation (Not specified)
Recommended Scenery Pack 103762 by FlynBrian submitted on September 18, 2024
Attributes
  • Iconic Airport

Checkout status

This airport is unclaimed. You can lock the airport to announce to the world that you’re working on it and prevent duplicate work from being submitted.

  • 103762 – FlynBrian 09/18/2024
    derived from submission 103590: Added ramp starts B to all gates 1 to 11 jets & turbo props aca and wja also some C's where they fit, resized and relocated gate bldg 7 and added missing red/white line to gate 7, added 2 new ga ramp starts to west parking area, moved all static AC from gates
    Approved Recommended
  • 103730 – FlynBrian 09/17/2024
    Added ramp starts on all gates 1 to 11 and reduced size to B turbo and jets and tried to limit airlines to Air Canada and West Jet but only Delta show up in XP12
    See comments
  • 103590 – Julian 09/04/2024
    PAPI changed to 'Right Side'. Large terrain polygons removed. Some FX added.
    Approved
  • 103537 – FlynBrian 09/02/2024
    Connected a taxiline on the apron I missed and corrected an error on a .fac height, added directional grass
    Approved
  • 103536 – FlynBrian 09/02/2024
    Connected a taxiline on the apron I missed and corrected an error on a .fac height
    See comments
  • 99601 – FlynBrian 12/01/2023
    Improved the look of my black filled gate #S and snapped together some pavement and aligned some taxilaines
    Approved
  • 97578 – Julian 08/07/2023
    APAPI changed to 'Right Side'.
    Approved
  • 97504 – FlynBrian 08/04/2023
    just found out that runway 26 has a APAPI on the right side not a PAPI which would not fit anyway
    Approved
  • 97336 – FlynBrian 07/28/2023
    OK
    Approved
  • 97258 – FlynBrian 07/24/2023
    Thanks Julian by closely examining the sheds I found 2 fuel tanks and a wall and the paths look much better
    See comments
  • 97127 – FlynBrian 07/18/2023
    To Julian's excellent Island Airport I added Porter Gate 11, filled triangles black, patches to apron, seaplane ramp to east end, fire hall and markings to GA parking at west end, south perimiter fence and path. Replaced obj trees. Reconfigured gates 1 to the new 11. Removed the embankments letting X-Plane 12 better water shore to be seen.
    See comments
  • 87605 – Litjan 11/04/2021
    Only change: Set elevation to 77m MSL. All credit for this excellent airport goes to Julian from Laminar Research!
    Approved
  • 85751 – Julian 07/27/2021
    Custom runway markings removed. Pavement and terrain polygons rationalized. Grunge objects removed.
    Approved
  • 82650 – Julian 02/13/2021
    Custom runway markings changed from line-arrays to polygons. Reduced grunge objects.
    Approved
  • 79840 – Julian 09/10/2020
    Windsock injection.
    Approved
  • 79839 – Julian 09/10/2020
    Windsock injection.
    See comments
  • 79814 – Julian 09/08/2020
    PAPI light injection for runway 08/26.
    Approved
  • 79813 – Julian 09/08/2020
    PAPI lights added for runway 08/26.
    See comments
  • 79396 – Julian 08/06/2020
    Scratch build. Complete.
    Approved
  • 79395 – Julian 08/06/2020
    Scratch build. Complete.
    Approved
  • 79360 – Julian 08/06/2020
    Work in Progress.
    See comments
  • 79347 – Julian 08/04/2020
    Work in Progress.
    See comments
  • 79346 – Julian 08/04/2020
    Work in Progress.
    See comments
  • 79325 – Julian 08/04/2020
    Work in Progress.
    See comments
  • 79319 – Julian 08/03/2020
    Work in Progress.
    See comments
  • 79305 – Julian 08/02/2020
    Work in Progress.
    See comments
  • 79289 – Julian 08/02/2020
    Work in Progress.
    See comments
  • 79280 – Julian 08/01/2020
    Work in Progress.
    See comments
  • 79265 – Julian 07/31/2020
    Work in Progress.
    See comments
  • 79235 – Julian 07/29/2020
    Work in Progress.
    See comments
  • 79219 – Julian 07/29/2020
    Work in Progress.
    See comments
  • 79216 – Julian 07/28/2020
    Work in Progress.
    See comments
  • 79203 – Julian 07/28/2020
    Work in Progress.
    See comments
  • 79196 – Julian 07/27/2020
    Work in Progress.
    See comments
  • 62536 – stjimmy225 08/21/2018
    simplified parking
    Approved
  • 61106 – stjimmy225 05/25/2018
    Updated taxi+ flow, fixed runway positions
    See comments
  • 60132 – ronb62 04/13/2018
    XSG4913 reports ils on rwy 08 is off . RWY 08/26 ils' is off by 3 degrees intentionally and for legal reasons. Look up BILLY BISHOP TORONTO CITY AIRPORT AIRPORT MASTER PLAN. Have reworked airport
    Approved
  • 51195 – WEDbot 02/16/2017
    Updated runway numbering and/or lengths to match Navigraph/Aerosoft data
    Approved
  • 48205 – WEDbot 02/15/2017
    Updated runway numbering and/or lengths to match Navigraph/Aerosoft data
    See comments
  • 43443 – BruceBuilds 04/07/2016
    Escape Toronto Intl. traffic in your GA aircraft and land at this unique island airport,Toronto City Centre. Once owned by the city it's now privately owned, open to the public and heavily used by larger turboprops and heli's. Scenic to fly into around dusk. Enjoy! RBE
    Approved
  • 36830 – chrisk 02/14/2015
    Updated Taxiways, Runways, Starts, ATC/TaxiWay Network. Basic 3D models included from ISDG Toronto CYTZ Scenery package. Airport package limited to only the CYTZ Airport itself (package does not include any 3D buildings or downtown buildings outside the airport boundary). Sorry for the previous upload -- this one was tested now and loads without issue.
    See comments
  • 36829 – chrisk 02/14/2015
    Updated Taxiways, Runways, Starts, ATC/TaxiWay Network. Basic 3D models included from ISDG Toronto CYTZ Scenery package. Airport package limited to only the CYTZ Airport itself (package does not include any 3D buildings or downtown buildings outside the airport boundary)
    See comments
  • 36828 – chrisk 02/13/2015
    Updated taxiway, runway, and taxi flow for CYTZ. Original From ISG Toronto City Centre Airport CYTZ scenery. Removed all non-XP10 lib objects or converted obhjects to XP10 Lib. Basic 3D -- Again, needs some TLC; but is a much better foundation to build upon.
    See comments
  • 13421 – WEDbot 01/17/2015
    Airport upload from X-Plane 10.32's default apt.dat
    Approved

Note that this scenery can only be used in the X-Plane flight simulator. You can download the free demo to try it on your computer.