Ermelo

Identifier in X-Plane FAEO
Full nameErmelo
Country South Africa
Datum Coordinates (lat, lon) -26.49600, 29.98000 open in Google Maps
Elevation (Not specified)
Recommended Scenery Pack 83096 by Jan Vogel submitted on March 6, 2021
Attributes
    (No particular attributes)

    Checkout status

    This airport is unclaimed. You can lock the airport to announce to the world that you’re working on it and prevent duplicate work from being submitted.

    map
    • 83096 – Litjan 03/06/2021
      Removed custom runway markings to allow acceptance on the Gateway. Added more ramp starts and removed .obj based static aircraft.
      Approved Recommended
    • 81433 – AEROWORX 12/06/2020
      Resolved floating objects.
      See comments
    • 80690 – Sheridan 10/22/2020
      Resolved objects outside airport boundary. Removed ramps starts where staionary aircraft are located.
      Approved
    • 80074 – Sheridan 09/19/2020
      Corrected location of Runway 02/20, Added 3D scenery. This airports elevation is set to 5700 ft / 1737 m above MSL. Both SkyVector reports it to be 5800 ft and Google Earth indicates 1768 m (5800 ft) at the middle of the runway. I'm also changing the Field Elevation to 5800 ft. Setting the Transition Altitude according to the CAA of SA guidelines of 8000 ft MSL within 25 nmi of Johannesburg or 2000 ft above ground level. Correct me if I've misinterpreted the regulations. And the TL to 3000 ft above ground level. Removed curved segments from "lib/g10/global_objects/fencing_SmallHedge_2.fac" as curved segments are only supported with Type2 facades. Used nodes to approximate the curved shape. Fixed some trees that were placed with Set MSL active causing floating trees. Fixed the fuel storage tanks that were placed with incortect MSL settings causing them to disappear into the ground as apose to just been sunken into the ground. Split the fencing into smaller segments to allow them to follow the contour of the area. Replaced all Buildings with Airport Kit.
      See comments
    • 65224 – CraigFath 01/04/2019
      Ramp start A2 Hold changed to Ramp operation 'None' due to interference with taxi routes as per comments. Thanks Julian.
      Approved
    • 64929 – CraigFath 12/24/2018
      Runway has been moved slightly, both to align with orthophotos and to move 13 threshold from the road. Local observations confirm it is not so close. Airfield includes water reservoirs on south side and weather radar (used water tank to depict this)
      See comments
    • 61002 – ItisiJuno 05/21/2018
      Removed Ramp Start 1. No other suitable position available.
      Approved
    • 60660 – ItisiJuno 05/09/2018
      Airport flattened.
      See comments
    • 15339 – WEDbot 01/17/2015
      Airport upload from X-Plane 10.32's default apt.dat
      Approved

    Note that this scenery can only be used in the X-Plane flight simulator. You can download the free demo to try it on your computer.