Hi, Can you please help I recently updated my airac to 1903 as it was showing out of date in the FMC. It's clearly showing it's up to date in the Zibo FMC and other aircraft like 747. Upon filing a flight plan in the FMC I have realised I can't see ILS information on the FVHA runway 05. Before updating Airac everything seemed to work okay. What could I be doing wrong?
I'm not sure whether it's related to ICAO change from FVHA to FVRG. If I try to use FVRG icao into the FMC it says not found in the database.
I've tried removing the third party product still the same issue remains. Prior 1903 Airac everything worked okay when the icao was FVHA now the icao is FVRG is that not the issue here?
Hi, I would like to give an update regarding the initial problem filed which now has been resolved. The issue was not to do with third party product but was due to ICAO change from FVHA to FVRG. I have had success with the assistance of a moderator cessna729 on the forums.x-plane.org. He has also advised me to report the problem to the X-PLANE 11 Gateway so the ICAO in the default apt.dat in future X_PLANE 11 releases then the FMC should show the approaches ILS etc.
I do understand its not a help forum for non-Laminar 3rd party products like the Zibo B737 but I did specify the problem also appeared on default aircraft that come with X-plane 11. The problem has nothing to do with any aircraft anyway its change of the ICAO change where the problem lies.
Using the Zibo B737 was part of the test to try and find the source of the problem because I didn't know if it was to do with aircraft, scenery or airac. I have also used the default x-plane 11 B737-800 and B747 the problem still replicated.
The latest 'Global Scenery' still identifies the Airport ID as FVHA even though the ICAO code has changed to FVRG causing problems with some ACARS 'add on' software, Zibo FMC, etc
Hi, Can you please help I recently updated my airac to 1903 as it was showing out of date in the FMC. It's clearly showing it's up to date in the Zibo FMC and other aircraft like 747. Upon filing a flight plan in the FMC I have realised I can't see ILS information on the FVHA runway 05. Before updating Airac everything seemed to work okay. What could I be doing wrong?
I'm not sure whether it's related to ICAO change from FVHA to FVRG. If I try to use FVRG icao into the FMC it says not found in the database.
The image below shows the reported problem:
https://puu.sh/D4g9g/e6399af95c.png
https://puu.sh/D4gHw/56a192aa04.png
I hope you will be able to assist and resolve this error.
Thanks in advance
Regards
Lloyd
Julian Lockwood March 27, 2019 3:20 AM
Third party product.
Ldee247 March 27, 2019 10:01 AM
I've tried removing the third party product still the same issue remains. Prior 1903 Airac everything worked okay when the icao was FVHA now the icao is FVRG is that not the issue here?
Ldee247 April 9, 2019 12:39 AM
Hi, I would like to give an update regarding the initial problem filed which now has been resolved. The issue was not to do with third party product but was due to ICAO change from FVHA to FVRG. I have had success with the assistance of a moderator cessna729 on the forums.x-plane.org. He has also advised me to report the problem to the X-PLANE 11 Gateway so the ICAO in the default apt.dat in future X_PLANE 11 releases then the FMC should show the approaches ILS etc.
Regards
Lloyd
Michael Minnhaar April 9, 2019 1:00 AM
This is not a help forum, in particular not for non-Laminar 3rd party products like the Zibo B737.
Questions like these are best asked on that vendors support system - the Zibo forum on X-plane.org in this case.
Ldee247 April 9, 2019 1:15 AM
Hi Michael,
I do understand its not a help forum for non-Laminar 3rd party products like the Zibo B737 but I did specify the problem also appeared on default aircraft that come with X-plane 11. The problem has nothing to do with any aircraft anyway its change of the ICAO change where the problem lies.
Using the Zibo B737 was part of the test to try and find the source of the problem because I didn't know if it was to do with aircraft, scenery or airac. I have also used the default x-plane 11 B737-800 and B747 the problem still replicated.
The latest 'Global Scenery' still identifies the Airport ID as FVHA even though the ICAO code has changed to FVRG causing problems with some ACARS 'add on' software, Zibo FMC, etc
Jan Vogel June 9, 2021 11:19 AM
Robert Gabriel Mugabe Intl in Zimbabwe has the ICAO ID of FVRG in Xplane since 11.50.
3rd party avionics need to read the meta data “ICAO ID” - not the “airport ID”.
T_McTry June 10, 2021 12:04 AM
Fair comment about dev's needing to address ICAO ID...but why shouldn't X Plane also reflect up to date Airport ID coding too, and not outdated data.
Seems to be no exclusion around airport leading to trees everywhere on the parking apron, can't use this scenery as shipped with XP12 as a result.
Autogen trees present in airport
Jan Vogel August 27, 2023 3:22 PM
No trees on airport in default XP12.
And airport authoritys have upgraded the airport with new ICAO code FVRG and aprons and textures. Locked for WIP