I am unable to generate ground routes for this airport using World Traffic 3, but I am not sure why as I can open and see the relevant data in there for this airport using WED.
I can generate ground routes for other airports from this gateway.
World Traffic 3.0.15 does not generate ground routes for this scenery, and I can't work out why.
It has a valid traffic route network, I can see it using WED. My setup is correct. I have downloaded other scenery including a different KPHX, and successfully generate ground routes for those. There are no error message, other than WT3 saying there is no taxi network.
It is unlikely you get any help by posting here. WT3 is a 3rd party utility, please approach the author of that utility to get help debugging your problem.
I'm new to X-Plane and Gateway so I may be doing something wrong...
At KPHX, the download seems to be the same as the default in XP, except there are moving vehicles in 55034. However, both seem to have the same basic problem. There are no structures (terminals, tower, etc.) at all. There are only runways and odd looking roads (elevated like bridges) which appear to be laid out where the actual roads are.
As with the other problem I reported, for some reason, I still can't take a screen print shot in XP.
And, again, not complaining, just commenting, especially since the problem could be something at my end.
[Sent on behalf of another user who discovered this bug]
The following error is generated with this airport in X-Plane 11.10r3:
BE ADVISED
There was a problem loading the scenery package:
Custom Scenery/Global Airports/
The scenery may not look correct.
Please see the log.txt file for detailed error information.
Log doesn't actually give any further information. Scenery then loads up and looks normal, but the error is still present.
Julian,
In your new KPHX, there are no gate assignments for Southwest Airlines. If you don't either leave some gates unassigned, or don't include a carrier that does use the airport then 3rd party traffic apps like World Traffic (Classic Jet Sims - Greg) can't use real world traffic for that airport effectively.
Thanks!
BLOVELAND
Terminal 2 was officially closed Feb. 4, 2020, and demolition was completed mid-2021. The reclaimed space will be used as an airport bus lot. Additionally, four new F gates were added to Terminal 3, Southwest-side: Gates F11 - F13, and Gate F15 (gate F14 was skipped for some reason). I have modified the '83496' scenery (referenced above) for my use and incorporated the mentioned changes. I have also added missing taxiways for RW26, and updated the airline assignments for the T4 and T3 gates, as well as fixed airliner size assignments. However, I have added custom local scenery to my mods, and as a result my KPHX scenery cannot be uploaded to the gateway. IF you want, I can remove the non-compatible items and clean up my work and submit it for review and inclusion for the next release cycle. Carlos Gutierrez
You must be logged in to participate in the discussion
I am unable to generate ground routes for this airport using World Traffic 3, but I am not sure why as I can open and see the relevant data in there for this airport using WED. I can generate ground routes for other airports from this gateway.
World Traffic 3.0.15 does not generate ground routes for this scenery, and I can't work out why.
It has a valid traffic route network, I can see it using WED. My setup is correct. I have downloaded other scenery including a different KPHX, and successfully generate ground routes for those. There are no error message, other than WT3 saying there is no taxi network.
Michael Minnhaar November 13, 2017 4:03 PM
It is unlikely you get any help by posting here. WT3 is a 3rd party utility, please approach the author of that utility to get help debugging your problem.
I'm new to X-Plane and Gateway so I may be doing something wrong...
At KPHX, the download seems to be the same as the default in XP, except there are moving vehicles in 55034. However, both seem to have the same basic problem. There are no structures (terminals, tower, etc.) at all. There are only runways and odd looking roads (elevated like bridges) which appear to be laid out where the actual roads are.
As with the other problem I reported, for some reason, I still can't take a screen print shot in XP.
And, again, not complaining, just commenting, especially since the problem could be something at my end.
Thank you.
Julian Lockwood December 6, 2017 7:19 PM
KPHX has 3D objects present in X-Plane 11.10.
Please upgrade to XP 11.10 and check your graphics rendering settings in the X-Plane User Interface.
[Sent on behalf of another user who discovered this bug]
The following error is generated with this airport in X-Plane 11.10r3:
BE ADVISED
There was a problem loading the scenery package:
Custom Scenery/Global Airports/
The scenery may not look correct.
Please see the log.txt file for detailed error information.
Log doesn't actually give any further information. Scenery then loads up and looks normal, but the error is still present.
Julian Lockwood December 8, 2017 1:21 PM
Tested with XP 11.10R3. Unable to duplicate. Might be due to the presence of a third-party plugin.
Julian,
In your new KPHX, there are no gate assignments for Southwest Airlines. If you don't either leave some gates unassigned, or don't include a carrier that does use the airport then 3rd party traffic apps like World Traffic (Classic Jet Sims - Greg) can't use real world traffic for that airport effectively.
Thanks!
BLOVELAND
bloveland May 9, 2020 8:21 PM
For accuracy, if desired, SW uses Terminal 4, C1-4, 6-9, 11-14, 16-19 and D1-8.
bloveland May 9, 2020 8:33 PM
and is the correct syntax to add multiple carriers aal,dal,swa ?
bloveland May 9, 2020 9:08 PM
disregard syntax ? found it.
bloveland May 10, 2020 12:21 AM
Oops, appears gate names must be unique as well....
Julian Lockwood May 11, 2020 5:59 PM
I’ve released the check-out for this airport, so it’s available to be updated by the community.
Jan Vogel March 9, 2021 8:40 AM
Airport is being worked on by Julian.
Julian Lockwood March 24, 2021 2:53 AM
Fixed and back up on the Gateway.
Terminal 2 was officially closed Feb. 4, 2020, and demolition was completed mid-2021. The reclaimed space will be used as an airport bus lot. Additionally, four new F gates were added to Terminal 3, Southwest-side: Gates F11 - F13, and Gate F15 (gate F14 was skipped for some reason). I have modified the '83496' scenery (referenced above) for my use and incorporated the mentioned changes. I have also added missing taxiways for RW26, and updated the airline assignments for the T4 and T3 gates, as well as fixed airliner size assignments. However, I have added custom local scenery to my mods, and as a result my KPHX scenery cannot be uploaded to the gateway. IF you want, I can remove the non-compatible items and clean up my work and submit it for review and inclusion for the next release cycle. Carlos Gutierrez