Baghdad Intl

Identifier in X-Plane ORBI
Full nameBaghdad Intl
Country Iraq
Datum Coordinates (lat, lon) 33.26200, 44.23100 open in Google Maps
Elevation (Not specified)
Recommended Scenery Pack 91505 by Albino Santos submitted on June 27, 2022
Attributes
  • Terrain Incompatible at Perimeter (XP 11)

Checkout status

This airport is unclaimed. You can lock the airport to announce to the world that you’re working on it and prevent duplicate work from being submitted.

map
  • 91505 – ckamaleao 06/27/2022
    revamped
    Approved Recommended
  • 87610 – HBuberci 11/04/2021
    Ground truck objects moved out to apron, some more apron lights added around the terminal building.
    Approved
  • 87585 – Litjan 11/02/2021
    Complete revamp of Baghdad. A solid foundation until better sat imagery allows more detail.
    Approved
  • 87317 – HBuberci 10/18/2021
    The original scenery I had was most probably downloaded from x-plane.org website and most credit goes to the original author. I removed all 3rd party objects leaving only the laminar assets and may be added some others from the lib along with jetway facades, re-worked the ground and ATC routes, re-arranged some of the military aprons as per the underlying Esri imagery - all this were done long time ago so I hope it will pass the evaluation :)
    See comments
  • 85088 – Mazyad765 06/20/2021
    Added accurate stands, helipads and signs.
    See comments
  • 84481 – [Deleted] 05/09/2021
    Before I did all the work on this airport, it had to be, "Flattened" because there were hills before I started. Put the airport back into World Editor and unflattened surface. Went to the airport in x plane 11 and all of the bldgs were half-way down in the ground at the airport. I left, went back and flattened surface in World Editor. Now, no hills and no bldgs down in the ground, so it had to be "flattened". I clicked on each runway and there was no way to flatten or unflatten the runway's only.
    See comments
  • 84480 – [Deleted] 05/09/2021
    Before I did all the work on this airport it had to be, "Flattened" because there were hills. I went back and unflattened surface and all of the bldgs were half-way down in the ground. I left, flattened surface. Now. no hills and no bldgs down in the ground, so it had to be "flattened.I clicked on each runway and there was no way to flatten or unflatten the runway only. I clicked on each runway and there were no selection to flatten or unflatten just the runway
    See comments
  • 84209 – [Deleted] 04/27/2021
    From my last submission, removed all forestry. Added only 4 exclusion zones, all exclusions checked. Completely enlarged the whole airport, rebuilt old terminal, installed all glass jetways. Made a larger terminal, all glass jetways. Parked aircraft. Auto Parking in rear. Constructed alot of office bldgs with prkng. Rearranged the bldgs and aircraft that were there.
    See comments
  • 84039 – [Deleted] 04/16/2021
    Hadto make other adjustments to the map.
    See comments
  • 83806 – [Deleted] 04/04/2021
    Added forests.Found and repaired several problems I overlooked before my first submission but I completely,"enlarged the airport", and then rebuilt the terminal that was there, built a larger terminal with glass jetways at both terminals. Alot of parked aircraft. Parking in the rear of the large terminal. Installed 2 XPLANE neon signs. Installed windmills. Had to repair the taxiways. Installed several warehouses. Made several office buildings. Installed airport boundary and exclusion zones.
    See comments
  • 83466 – [Deleted] 03/21/2021
    Found and repaired several problems I overlooked before my first submission but I completely,"enlarged the airport", and then rebuilt the terminal that was there, built a larger terminal with glass jetways at both terminals. Alot of parked aircraft. Parking in the rear of the large terminal. Installed 2 XPLANE neon signs. Installed windmills. Had to repair the taxiways. Installed several warehouses. Made several office buildings. Installed airport boundary and exclusion zones.
    See comments
  • 83410 – [Deleted] 03/17/2021
    I hate to turn this in for the 3rd time but I found and repaired several problems I had overlooked from before.
    See comments
  • 83389 – [Deleted] 03/16/2021
    In my first submission I forgot to say that I had completely,"enlarged the airport", and then rebuilt the terminal that was there, built a larger terminal with glass jetways at both terminals. Alot of parked aircraft. Parking in the rear of the large terminal. Installed 2 XPLANE neon signs. Had to repair the taxiways. Installed several warehouses. Made several office buildings. Installed airport boundary and exclusion zones.
    See comments
  • 83380 – [Deleted] 03/15/2021
    Rebuilt the terminal that was there, built a larger terminal with glass jetways at both terminals. Alot of parked aircraft. Parking in the rear of the large terminal. Installed 2 XPLANE neon signs. Had to repair the taxiways. Installed several warehouses. Made several office buildings. Installed windmills. Installed airport boundary and exclusion zones.
    See comments
  • 77981 – sao18 05/28/2020
    (No comment)
    See comments
  • 77672 – sao18 05/20/2020
    (No comment)
    See comments
  • 77299 – sao18 05/09/2020
    new hangers and line markings
    See comments
  • 70992 – Julian 08/28/2019
    Various fixes.
    Approved
  • 70684 – sao18 08/18/2019
    corrected ramp start and e-mail
    See comments
  • 70307 – sao18 08/04/2019
    mod. ramp starts
    See comments
  • 70037 – sao18 07/25/2019
    airport boundry modified
    See comments
  • 69490 – sao18 07/04/2019
    fixed missing taxiway
    See comments
  • 69489 – sao18 07/04/2019
    (No comment)
    See comments
  • 41177 – WEDbot 07/22/2015
    Moving recommended pack from ORBS to the new airport ID of ORBI
    Approved

Note that this scenery can only be used in the X-Plane flight simulator. You can download the free demo to try it on your computer.