You will most likely see this problem if the airport in X-Plane has a different runway name than the GPS/FMC is expecting. This could be because the real world airport has moved or runways have been renamed. The airport will need to be corrected in WED and submitted to the Gateway to get the change into the default airport data.
Hello everyone I wanted to report this error as I can not even make a flight through this airport if someone would be so kind to explain this error or fix it I would be very grateful Thank you.
If you mean that you can not select IFR procedures because a “runway is missing”? This will be fixed with the next update to XPlane…but you must use current navdata for it to work.
The airport is missing multiple taxiways, most of them in the sound-west part of the airport. Lining up on runway 35L currently requires you to taxi over the grass.
It would be awesome if somebody could rework this airport to match the current Jeppesen Charts. Thank you
Trying to depart from this airport to any destination causes a "soft crash", i.e. system slows to 3.5fps (from 35-40) and becomes unusable. The alert on loading an aircraft is "Missing waypoint RW33"
static airplanes show even when settings off. I wouldn't mind if they were on positions of abandoned aircrafts like irl but on the 777s and 747s on gates is really bothering when fliying online and because they use small gates made for a32xs airplanes
on some gates like 28 to 23 the jetways are too close to the aircraft, in some cases overlapping the taxiway. This fixes when I attach it to the aircraft but if I am arriving I woll probaby have the wing, fusselage or nose of the aircraft crashing with the jetway
Fixed up the worst offenders, many jetways will not work for docking, though, needs a knowledgeable scenery designer to fix up this airport, a ton of misconceptions by previous designer, including how ground vehicles are supposed to be set up etc.
for loading procedures I deleted all lines with "R36" & "RW36" from Custom Data/CIFP/SCEL.dat and it works :)
Hello,my problem is when I make the procedure in FMC by 737 default xp11 give error runway 36 no exist and I don't can make the procedure,help please
Jennifer Roberts September 18, 2017 2:21 PM
You will most likely see this problem if the airport in X-Plane has a different runway name than the GPS/FMC is expecting. This could be because the real world airport has moved or runways have been renamed. The airport will need to be corrected in WED and submitted to the Gateway to get the change into the default airport data.
Michael Minnhaar September 18, 2017 3:25 PM
Do* NOT* change the airport. Its a current X-plane limitation in that the X-plane scenery system can NOT track the monthly changing navigraph data. XP11.10 will adress that to some extend, but in this particular example the navigraph runway name is not X-plane legal (THR36). See also https://forums.x-plane.org/index.php?/forums/topic/127126-runway-not-found-so-no-sids-and-no-stars-for-any-runway/&tab=comments#comment-1224521
Jan Vogel February 25, 2021 9:54 AM
Updates to this airport were made in the interim - this report can be closed.
existen errores al tratar de usar el FMS en el Aeropuesrto de Stgo Scel.
Philipp Ringler December 14, 2020 6:07 PM
That's a custom scenery, not a gateway scenery.
Felo_cl December 14, 2020 10:42 PM
is it just the DLC then? even with the second error indicating RW34 waypoint error? thanks for your answer
when you try to enter a SID , in the G1000 for this airport you got a error , and you have no sid ,
Philipp Ringler January 18, 2021 11:38 PM
Duplicate of
XSG-3172
Done
Hello everyone I wanted to report this error as I can not even make a flight through this airport if someone would be so kind to explain this error or fix it I would be very grateful Thank you.
Jan Vogel June 15, 2021 7:19 PM
If you mean that you can not select IFR procedures because a “runway is missing”? This will be fixed with the next update to XPlane…but you must use current navdata for it to work.
CapFrugone June 15, 2021 7:44 PM
So I just have to wait for the next update to fix this...I am using the latest navdata.
The airport is missing multiple taxiways, most of them in the sound-west part of the airport. Lining up on runway 35L currently requires you to taxi over the grass.
It would be awesome if somebody could rework this airport to match the current Jeppesen Charts. Thank you
jwenting August 15, 2023 6:05 AM
new version 96469 should have done all that.
Jan Vogel June 17, 2025 5:25 PM
Fixed by new submissions, thanks!
Trying to depart from this airport to any destination causes a "soft crash", i.e. system slows to 3.5fps (from 35-40) and becomes unusable. The alert on loading an aircraft is "Missing waypoint RW33"
My AIRAC is up to date 2010. Log Attached
Gulfstream October 7, 2022 9:19 AM
Others on the Magknight 787 discord are reporting the issue as well.
Philipp Ringler October 7, 2022 5:28 PM
Fixed in xp12
static airplanes show even when settings off. I wouldn't mind if they were on positions of abandoned aircrafts like irl but on the 777s and 747s on gates is really bothering when fliying online and because they use small gates made for a32xs airplanes
Jan Vogel June 22, 2025 2:19 PM
Removed illegal aircraft objects, will change status to fixed when airport is approved and recommended.
on some gates like 28 to 23 the jetways are too close to the aircraft, in some cases overlapping the taxiway. This fixes when I attach it to the aircraft but if I am arriving I woll probaby have the wing, fusselage or nose of the aircraft crashing with the jetway
Jan Vogel June 22, 2025 2:25 PM
Fixed up the worst offenders, many jetways will not work for docking, though, needs a knowledgeable scenery designer to fix up this airport, a ton of misconceptions by previous designer, including how ground vehicles are supposed to be set up etc.
lib/airport/Ramp_Equipment/traffic_cone_stack_1.obj
el aeropuerto no esta actualizado con las nuevas terminales