Just found this bug report. Have done WAHH from scratch. WARJ needs removing as it will conflict with WAHH and WARJ has runways located on top of each other and in line that are the same runway with different numbers 9/27 and 9L/27R. If not you will have a triplication of Rwy 9/27
this same "renaming" issue will (i think) relate to all airports listed in xsg5107-5112 inclusive. I contacted Julian when I discovered this issue, retrospectively, and he has sorted this 1 airport.
Airport identifier-code changes are accomplished by re-submitting the airport to the Gateway. The primary (original) X-Plane Airport ID must remain the same, but the appropriate metadata (ICAO, FAA, IATA, etc.) should be inserted in WED, and the modified airport uploaded to the Gateway.
New ICAO code is WAHH, please change the x plane identifier to match the new ICAO. The FMC don't recognize WAHH as the x plane identifier of this airport still using WARJ, as a result, user can't load the SID, STAR, and IAP. Thanks in advance.
For new construction at a NEW location: Please file a new airport code request
For an EXISTING airport mis-located in X-Plane: Adjust the airport location and re-submit to the Gateway
For an EXISTING airport with a new identifier: Re-submit the airport to the Gateway. Place new identifier in the meta data-field ONLY (ICAO, FAA, IATA, etc.)
For an EXISTING airport with an incorrect identifier: Re-submit the airport to the Gateway. Place correct identifier in the meta data-field ONLY (ICAO, FAA, IATA, etc.)
For an EXISTING airport with a NEW name: Re-submit the airport to the Gateway with the name modified as required.
please revise to new ICAO code WAHH
Julian Lockwood April 30, 2018 10:04 PM
Re-submit airport to Gateway with same airport ID, and updated ICAO meta data.
ronb62 May 3, 2018 12:04 PM
Just found this bug report. Have done WAHH from scratch. WARJ needs removing as it will conflict with WAHH and WARJ has runways located on top of each other and in line that are the same runway with different numbers 9/27 and 9L/27R. If not you will have a triplication of Rwy 9/27
Michael Minnhaar May 7, 2018 4:27 PM
Please re-submit your new layout using the Airport ID WARJ and ICAO Code meta tag set to WAHH.
The airport ID of WAHH was improperly assigned and will have to be deprecated immediately.
ronb62 May 10, 2018 4:59 PM
this same "renaming" issue will (i think) relate to all airports listed in xsg5107-5112 inclusive. I contacted Julian when I discovered this issue, retrospectively, and he has sorted this 1 airport.
Julian Lockwood May 10, 2018 5:14 PM
WAHH deprecated. WARJ awaiting new submission on Gateway with ICAO set to WAHH.
Albino Santos August 26, 2018 12:04 AM
Some confusion here, WARJ was deprecated on March 2015 and changed to WAHH.
Albino Santos August 26, 2018 12:08 AM
Here is a Chart Alert from Jeppesen
Albino Santos August 26, 2018 12:09 AM
http://ww1.jeppesen.com/documents/aviation/notices-alerts/chart-aler
Albino Santos August 26, 2018 2:32 PM
link is truncated, but file is above.
Jan Vogel February 26, 2021 7:02 PM
New airport already uploaded with new ICAO code in meta data.
This report can be closed.
Needs this deleting as replaced by wahh
new ICAO: WAHH
Julian Lockwood October 10, 2019 6:15 PM
Airport identifier-code changes are accomplished by re-submitting the airport to the Gateway. The primary (original) X-Plane Airport ID must remain the same, but the appropriate metadata (ICAO, FAA, IATA, etc.) should be inserted in WED, and the modified airport uploaded to the Gateway.
New ICAO code is WAHH, please change the x plane identifier to match the new ICAO. The FMC don't recognize WAHH as the x plane identifier of this airport still using WARJ, as a result, user can't load the SID, STAR, and IAP. Thanks in advance.
Julian Lockwood July 15, 2020 5:45 PM
For new construction at a NEW location: Please file a new airport code request
For an EXISTING airport mis-located in X-Plane: Adjust the airport location and re-submit to the Gateway
For an EXISTING airport with a new identifier: Re-submit the airport to the Gateway. Place new identifier in the meta data-field ONLY (ICAO, FAA, IATA, etc.)
For an EXISTING airport with an incorrect identifier: Re-submit the airport to the Gateway. Place correct identifier in the meta data-field ONLY (ICAO, FAA, IATA, etc.)
For an EXISTING airport with a NEW name: Re-submit the airport to the Gateway with the name modified as required.
Jan Vogel April 3, 2021 6:22 PM
New airport with airport ID WARJ and ICAO ID WAHH is present in Xplane.