It says 3d yet in wed, there is nothing but airport dat. no runway nor taxiways. In addition it opens in WED to the old Aero club which is not SUU but 8QO, which I am working on currently, as it is now a helipad only. I am not sure if the wedbot got it wrong, so i will download that and check its location.
Opens in WED to the old aero club 8Q0. KSUU is the HUGE air force base just to the east by about.. oh a mile or so.
The base runways are in the sim so not sure what the deal is, the new ksuu I commented on as with the same issue and ot 3d at least not in wed. zero objects.
For new construction at a NEW location: Please file a new airport code request
For an EXISTING airport mis-located in X-Plane: Adjust the airport location and re-submit to the Gateway
For an EXISTING airport with a new identifier: Re-submit the airport to the Gateway. Place new identifier in the meta data-field ONLY (ICAO, FAA, IATA, etc.)
For an EXISTING airport with an incorrect identifier: Re-submit the airport to the Gateway. Place correct identifier in the meta data-field ONLY (ICAO, FAA, IATA, etc.)
For an EXISTING airport with a NEW name: Re-submit the airport to the Gateway with the name modified as required.
KSUU opens fine for me in WED, and if I have it saved in my Custom Scenery file, everything works OK in X-Plane. However, if I remove it from Custom scenery and start Xp 11.41, The DSF files do not appear. Somehow, XP11 is not picking them up. Also, the package that loads when I start XP11 is NOT my work!
I don't think that my package dated 25 Dec 2019 has been included in Global Airports yet and the original WEDBOT LEGO version is appearing when you run X-Plane unless you are using the Beta 11.5 versions.
Diaster
commented
in reference to scenery pack
73839on June 21, 2020 2:30 PM
I will try again here. W/O the scenery pak installed I can fly over and see KSUU (wed bot version it seems no 3d) I installed the scenery pack above and the program froze on startup. Naturally, I assumed it was the file I just added.
So i opened it KSUU in WED to check it out. Instead of being above ksuu the viewpoint was over 8Q0. No buildings no runaway no taxiways, zilch.
SO I quit WED and opened the folder. Inside I find Folder (earth nav data)a file (copying) and a txt file (readme).
That is it. The bot file downlaod looks the same but is smaller 8k vs 30+ k so the "copying" file is bigger) I am going to try again now
ok, so I ran x-plane and this time it started, fresh down load (had same contents and wed examination) how ever in sim there were buildiings, see boundary may conflict with my 8Q0 as cars were missing but helo was there.
anyway, the taxi-way had center lights but no edge lights. is that yours? and for the life of my why does the scenery pack not show anything. I was going to work on it if no else had :)
It says 3d yet in wed, there is nothing but airport dat. no runway nor taxiways. In addition it opens in WED to the old Aero club which is not SUU but 8QO, which I am working on currently, as it is now a helipad only. I am not sure if the wedbot got it wrong, so i will download that and check its location.
Opens in WED to the old aero club 8Q0. KSUU is the HUGE air force base just to the east by about.. oh a mile or so.
The base runways are in the sim so not sure what the deal is, the new ksuu I commented on as with the same issue and ot 3d at least not in wed. zero objects.
Julian Lockwood June 23, 2020 5:20 PM
For new construction at a NEW location: Please file a new airport code request
For an EXISTING airport mis-located in X-Plane: Adjust the airport location and re-submit to the Gateway
For an EXISTING airport with a new identifier: Re-submit the airport to the Gateway. Place new identifier in the meta data-field ONLY (ICAO, FAA, IATA, etc.)
For an EXISTING airport with an incorrect identifier: Re-submit the airport to the Gateway. Place correct identifier in the meta data-field ONLY (ICAO, FAA, IATA, etc.)
For an EXISTING airport with a NEW name: Re-submit the airport to the Gateway with the name modified as required.
KSUU opens fine for me in WED, and if I have it saved in my Custom Scenery file, everything works OK in X-Plane. However, if I remove it from Custom scenery and start Xp 11.41, The DSF files do not appear. Somehow, XP11 is not picking them up. Also, the package that loads when I start XP11 is NOT my work!
I don't think that my package dated 25 Dec 2019 has been included in Global Airports yet and the original WEDBOT LEGO version is appearing when you run X-Plane unless you are using the Beta 11.5 versions.
I will try again here. W/O the scenery pak installed I can fly over and see KSUU (wed bot version it seems no 3d) I installed the scenery pack above and the program froze on startup. Naturally, I assumed it was the file I just added. So i opened it KSUU in WED to check it out. Instead of being above ksuu the viewpoint was over 8Q0. No buildings no runaway no taxiways, zilch. SO I quit WED and opened the folder. Inside I find Folder (earth nav data)a file (copying) and a txt file (readme). That is it. The bot file downlaod looks the same but is smaller 8k vs 30+ k so the "copying" file is bigger) I am going to try again now
ok, so I ran x-plane and this time it started, fresh down load (had same contents and wed examination) how ever in sim there were buildiings, see boundary may conflict with my 8Q0 as cars were missing but helo was there. anyway, the taxi-way had center lights but no edge lights. is that yours? and for the life of my why does the scenery pack not show anything. I was going to work on it if no else had :)
ok.. i figured it out. i have to download the file straight from the gateway with wed. My program kept opening a NO apt file sorry for the confusion
ok.. i figured it out. i have to download the file straight from the gateway with wed. My program kept opening a NO apt file sorry for the confusion
ok.. i figured it out. i have to download the file straight from the gateway with wed. My program kept opening a NO apt file sorry for the confusion