Melbourne Intl
Identifier in X-Plane | YMML |
---|---|
Full name | Melbourne Intl |
Country | Australia |
Datum Coordinates (lat, lon) | -37.66900, 144.83400 open in Google Maps |
Elevation | (Not specified) |
Recommended Scenery Pack |
104622 by
|
Attributes |
Checkout status
This airport is unclaimed. You can lock the airport to announce to the world that you’re working on it and prevent duplicate work from being submitted.
- 104622 – ollie 11/21/2024Added dual jetway functionality. Verified all gate capacities with Nov 24 AIP, and tidied some related markings.Approved Recommended
- 104536 – ollie 11/15/2024Installed new taxiway Delta (construction complete shortly). Kept Echo operational for now (realignment works over next 18 months). Minor tidy ups of related markings / signage.Approved
- 104503 – ollie 11/12/2024Implemenation of dual taxilane yankee upgradeApproved
- 100813 – ollie 02/14/2024Added TORA signs, amendments to taxiway centreline lighting, added ILS critical area 16 to taxi route. No other changes.Approved
- 100578 – ollie 02/01/2024Minor amendments to signage and taxi routes only.Approved
- 100518 – ollie 01/29/2024Replaced depreciated g10 terrain polygon (A/N: from prior pack previously approved). Fixed all term kit facade heights that were generating validation warnings. Cleaned up Q/E taxiway markings and lighting. Tidied G/H ramp starts including adding missing sub-ramps. Added ATC flows for multiple runway usage.Approved
- 100410 – ollie 01/24/2024Comprehensive tidy up as follows: lead-on/off lights, expanded area around taxiway C, jetways + associated facades, ramps at international (e.g., where gate can be occupied by a heavy or two medium acfts), directional signage, taxi routes. Expanded western boundary to APAM land, to accomodate development of 16R/34L and western precinct.See comments
- 100172 – CatonaPC 01/08/2024Corrected airline parking positions (eg: remove stray Virgin Airlines from Qantas pier). Fixed and ensured all other piers assigned correct airlines. Common piers assigned regional airlines but not possible to determine exact airlines as these start up and fail in the time it takes me to think of what airline to park at a particular gate. So a best guess is the best one can hope for. Removed all airline assignments for international pier to ensure all foreign aircraft can get a gate if they're in town. No other changes. Note: Validation warnings are from previous submission, not this one. I have not made any changes here and submitted 'as is'.Approved
- 99862 – ollie 12/23/2023Removed building outside old airport boundary intersecting with autogen, also extended boundary for future expansion. Fixed up jetways on pier E as per request.Approved
- 99841 – ollie 12/21/2023Cleaned up Pier C including removing C2, adding C11A, fixing/optimising dynamic jetways and ramp starts. Fixed misc errors including short taxiway segments, boundary issues, etc.See comments
- 88577 – Litjan 12/18/2021Removed always flatten - we started getting bug reports because GLS approaches were not servicable since runway 34 is almost 100 feet lower than rest of airport. Split up the worst floating facades on terminal to deal with sloping terrain. Made boundary adhere better to real airport premises.Approved
- 86637 – ronb62 09/15/2021*show with* changes only, All .obj, .agp & .fac set to 1-defaultApproved
- 80920 – ronb62 11/06/2020update of airline codes for ramp starts as requested by user plus addition of 3 pushback tugs are only change since last approvalApproved
- 80773 – ronb62 10/27/2020OOps, 1 scenery boundary point accidently moved. The rest ( a N to S band W of Airport) differs because the sat imagery is out of date and has been done in readiness for scenery recut (XP12) and 1 new runway construction for which airport has this land according to reports.Approved
- 80768 – ronb62 10/27/2020Full rework from scratch. Have finished the taxiway V as seen in sat image March and prepared for new taxiway project Z which was observed started in video also March. Changed boundary to match land purchased and in prep for new runway and also base scenery recutSee comments
- 61929 – Thx1137 07/17/2018More marking cleanupo and works better with World Traffic.See comments
- 61894 – Thx1137 07/14/2018Fixed issue preventing aircraft exiting early on 16. Improved alignment af many markings.See comments
- 53221 – pikitanga 07/01/2017Fix bent taxiway marking when approaching rwy 34 hold.Approved
- 52228 – pikitanga 05/05/2017Add service vehicles & terminal corridors.Approved
- 51994 – wichid 04/19/2017(No comment)Approved
- 51637 – pikitanga 03/16/2017Reviewed taxi signs & gate sizes.Approved
- 51515 – pikitanga 03/03/2017Add terminal etc.Approved
- 50617 – WEDbot 02/16/2017Updated runway numbering and/or lengths to match Navigraph/Aerosoft dataApproved
- 49449 – WEDbot 02/16/2017Updated runway numbering and/or lengths to match Navigraph/Aerosoft dataSee comments
- 47621 – WEDbot 02/15/2017Updated runway numbering and/or lengths to match Navigraph/Aerosoft dataSee comments
- 46474 – Julian 02/02/2017WED validation errors fixed.Approved
- 36825 – chrisk 02/13/2015YMML Updated Taxiways and Runways from ISDG Melbourne Scenery. Some basic 3D XP10 objects included form ISDG Melbourne Project.See comments
- 35406 – WEDbot 01/17/2015Airport upload from X-Plane 10.32's default apt.datApproved
Note that this scenery can only be used in the X-Plane flight simulator. You can download the free demo to try it on your computer.