16/34 Runway is in wrong place. West of where it should be. Also there is now a 16L/34R so the old 16/34 has become 16R/34L. Taxiways (or much else) bear no relationship to reality. Compare Bing maps to Google Earth to see new runway and taxiways. Will work on it but can find zero info really so it will be limited. Airport does not get a good review from travellers!
think this might possibly be the airac FMC data needing updating and not a scenery issue for Timvn. Use navigraph and subscribe for update unless XP is going to issue updated data for FMC. This airport has just had new runway and is going through major upgrade on existing runway. I have done the old runway as it will be, if not already done, when I totally revamped this airport
Actually tinmvn will possibly ALSO have to download the scenery pack from the gateway as I think the full revamp I did hasn’t been shipped via XP update process yet and so won’t be physically seen either
xsg-4431 ammended fence fac crossing roads and security gates not showing and upped. Re reported runway problem. HEGN had only 1 runway 16/34. they built a second 16L/34R and are repairing the existing 16/34 which has become 16R/34L and is due to open mid Feb 2018 i.e. next week. A youtube vid shows 16r/34L open Jun 2017. Google earth et al. don't show this yet. XP 11 hasn't updated this airport via it's update system (which is why I think Timvn has the problem). I have just validated the airport with WED 1.7 and it passes OK I also checked the version I upped on Jan 1st and that still passes. I think Timvn needs to download the new scenery to solve this problem or XP11 updates system updates it.I completely redid this airport and I believe all runways are named correctly. p.s thanks for the heads up on WED 1.7
Runaway 16R/34L is missing, also the ramp and taxiways are located to the wrong side of the airport. In the scenery is located to the west side of the runways, when in the reality is located to the EAST side.
16L is missing
ronb62 December 7, 2017 4:13 AM
fixed in a complete rework of webots version
ronb62 January 1, 2018 5:54 AM
submission accepted -so can mark off as fixed
hey EinPinsel, install WED and start building, that airport should be a blast :) have fun !
16/34 Runway is in wrong place. West of where it should be. Also there is now a 16L/34R so the old 16/34 has become 16R/34L. Taxiways (or much else) bear no relationship to reality. Compare Bing maps to Google Earth to see new runway and taxiways. Will work on it but can find zero info really so it will be limited. Airport does not get a good review from travellers!
When I try to put in runway 34L as takeoff runway, the FMC says: NOT IN DATABASE
How do I fix this problem?
Julian Lockwood January 22, 2018 12:59 PM
The runway numbers have probably changed at this airport. For Gateway community.
ronb62 January 23, 2018 5:38 AM
think this might possibly be the airac FMC data needing updating and not a scenery issue for Timvn. Use navigraph and subscribe for update unless XP is going to issue updated data for FMC. This airport has just had new runway and is going through major upgrade on existing runway. I have done the old runway as it will be, if not already done, when I totally revamped this airport
ronb62 January 29, 2018 7:04 AM
Actually tinmvn will possibly ALSO have to download the scenery pack from the gateway as I think the full revamp I did hasn’t been shipped via XP update process yet and so won’t be physically seen either
Michael Minnhaar January 29, 2018 12:43 PM
Please use WED 1.7 https://forums.x-plane.org/index.php?/forums/topic/138883-wed-17-public-preview-updated-windows-version/ and validate the runway name with this.
The runway name requirements for the gateway are set by the CIFP data as set on the gateway server (and shipped with the current X-plane release) and independent of any Navigraph or other external data source: https://developer.x-plane.com/2017/09/break-all-the-airports-correcting-runways-in-wed-1-7-and-x-plane-11-10/
ronb62 February 2, 2018 7:27 AM
xsg-4431 ammended fence fac crossing roads and security gates not showing and upped. Re reported runway problem. HEGN had only 1 runway 16/34. they built a second 16L/34R and are repairing the existing 16/34 which has become 16R/34L and is due to open mid Feb 2018 i.e. next week. A youtube vid shows 16r/34L open Jun 2017. Google earth et al. don't show this yet. XP 11 hasn't updated this airport via it's update system (which is why I think Timvn has the problem). I have just validated the airport with WED 1.7 and it passes OK I also checked the version I upped on Jan 1st and that still passes. I think Timvn needs to download the new scenery to solve this problem or XP11 updates system updates it.I completely redid this airport and I believe all runways are named correctly. p.s thanks for the heads up on WED 1.7
Jan Vogel February 26, 2021 8:57 AM
New uploads fixed this - can be closed.
ILS34 is not properly aligned
ronb62 May 3, 2020 8:53 PM
it is misaligned but this is not a scenery error. It needs reporting as a Navaid issue.
Philipp Ringler November 6, 2020 3:00 AM
This was filed before 11.50 data update took effect. If this is still incorrect in 11.50r3, file a new bug.
Runaway 16R/34L is missing, also the ramp and taxiways are located to the wrong side of the airport. In the scenery is located to the west side of the runways, when in the reality is located to the EAST side.
Jan Vogel March 10, 2021 9:13 AM
Can not confirm this - runways are present and layout is correct.
Needs work. Please remove static and weird AC vents. pretty sure i dont have a conflict
Needs work. Please remove static and weird AC vents. pretty sure i dont have a conflict