Saco ILS RWY 18 is listed with reciprocal radial 0, it should be 002, the chart indicates that the ILS 18 radial is 182. this causes a misalignment on approach.
NaviGraph charts indicate that the nearly north/south runway is actually Runway 19/35. This scenery shows runway 18/36 which prevents GPS procedures from loading due to a "missing Rwy19"
A new version was just uploaded which should feature the correct set of runways (by necessity of validation). Pending release with next scenery injection.
The RWY was renumbered form 36/18 to 01/19. When i try to fill my FPL all SIDs and STARs of this RWY say the following: "PROCEDURES CANNOT BE LOADED: Missing waypoint RWY 19
Missing runways can be reported to the X-Plane Scenery Gateway if your airac is up to date."
Hmm, this is odd - runway 19 is present in my version of XP11.55r2. Is the runway present (can you see it) in your installation? Are you trying to use an addon or default GPS?
I can see both runways 01/19 and 05/23 in the sim. No SACO scenery installed. Default Cessna, tested with both the default GPS 530 and the G1000. No third-party GPS installed, but using Navigraph data.
Log:
MACIBM_alert: Prozeduren konnten nicht geladen werden:
MACIBM_alert: Missing waypoint RW19
I see what you mean. If I remember right, before the 11.55 update SACOs 01/19 runway was 36/18, as also mentioned above. At that time I fixed it by manually editing the X-Plane apt.dat file to match the navigraph data, and could load procedures. After 11.55 update, letting the update overwrite my manually edited apt.dat file, the old problem is back. Examining the new apt.dat file from 11.55 and the SACO.dat file from navigraph, I currently also fail to see where that mismatch is coming from. Pre-11.55 it was obvious, now it actually looks correct to me. Strange...
It turned out that newly constructed runways (not existing when XP11 was made) can not really be added nav-data wise, because this would create a mismatch for the many users NOT using current navdata. This problem should be fixed with XP12.
The scenery main runway is incorrect, and makes the fms systems of the aircraft to go wrong. The correct runway is 01-19, and no more 18-36. Please correct it.
Saco ILS RWY 18 is listed with reciprocal radial 0, it should be 002, the chart indicates that the ILS 18 radial is 182. this causes a misalignment on approach.
Robin Peel July 16, 2017 7:54 PM
Thank you. This has been corrected for the next nav data release. - Robin
ATIS Frequency is 127.50 Mhz in real life https://skyvector.com/airport/SACO/Cordoba-Airport , not 114.50(actual VOR range freq.)
Julian Lockwood February 10, 2018 2:22 PM
For Gateway community.
Jan Vogel March 28, 2021 9:35 AM
This was corrected in one of the latest submissions.
NaviGraph charts indicate that the nearly north/south runway is actually Runway 19/35. This scenery shows runway 18/36 which prevents GPS procedures from loading due to a "missing Rwy19"
Jennifer Roberts February 23, 2021 3:55 PM
Closing reports that were last updated 1 year ago or more in bug base clean up. These are most likely fixed due to Gateway scenery cuts in that time.
PROCEDURES CANNOT BE LOADED: Missing waypoint RWY 19
Missing runways can be reported to the X-Plane Scenery Gateway if your airac is up to date.
Jan Vogel March 8, 2021 2:49 PM
A new version was just uploaded which should feature the correct set of runways (by necessity of validation). Pending release with next scenery injection.
AI traffic can't takeoff from runway.
Runway 18-36 change for 01/19
Jan Vogel March 8, 2021 3:07 PM
A new version of this airport was uploaded and is pending release with the next scenery injection. It should fix this issue.
The RWY was renumbered form 36/18 to 01/19. When i try to fill my FPL all SIDs and STARs of this RWY say the following: "PROCEDURES CANNOT BE LOADED: Missing waypoint RWY 19
Missing runways can be reported to the X-Plane Scenery Gateway if your airac is up to date."
Jan Vogel March 13, 2021 7:02 AM
A new version of this airport was uploaded and will be injected with one of the next updates to XPlane. This should fix the issue.
PeterS72 July 11, 2021 4:33 PM
Still getting "Missing waypoint RW19" when trying to load GPS procedures to SACO with latest 11.55 apt.dat. Using navigraph AIRAC 2106.
Jan Vogel July 12, 2021 7:00 PM
Hmm, this is odd - runway 19 is present in my version of XP11.55r2. Is the runway present (can you see it) in your installation? Are you trying to use an addon or default GPS?
PeterS72 July 14, 2021 9:33 PM
I can see both runways 01/19 and 05/23 in the sim. No SACO scenery installed. Default Cessna, tested with both the default GPS 530 and the G1000. No third-party GPS installed, but using Navigraph data.
Log:
MACIBM_alert: Prozeduren konnten nicht geladen werden:
MACIBM_alert: Missing waypoint RW19
I see what you mean. If I remember right, before the 11.55 update SACOs 01/19 runway was 36/18, as also mentioned above. At that time I fixed it by manually editing the X-Plane apt.dat file to match the navigraph data, and could load procedures. After 11.55 update, letting the update overwrite my manually edited apt.dat file, the old problem is back. Examining the new apt.dat file from 11.55 and the SACO.dat file from navigraph, I currently also fail to see where that mismatch is coming from. Pre-11.55 it was obvious, now it actually looks correct to me. Strange...
Jan Vogel September 16, 2021 10:50 AM
It turned out that newly constructed runways (not existing when XP11 was made) can not really be added nav-data wise, because this would create a mismatch for the many users NOT using current navdata. This problem should be fixed with XP12.
Jan Vogel March 11, 2023 5:47 AM
This is fixed with XP12.
The scenery main runway is incorrect, and makes the fms systems of the aircraft to go wrong. The correct runway is 01-19, and no more 18-36. Please correct it.
Jan Vogel March 12, 2023 6:07 AM
XP12 features the runways 05/23 and 01/19
Since 2019 rwy 36/18 has changed to 01/19. Please update, unable to use procedures
Jan Vogel July 6, 2025 7:45 AM
Fixed with recent submissions, thank you!