It appears that this scenery could use a bit of work. Adding an airport boundary might help smooth the bumps some, and an exclusion zone would remove trees from the taxiway.
Otherwise, you can try UNchecking "Runway follows land contours". After this action quit and restart X-Plane. When you do this you will return to flat land areas a bit inside the Scenery's airport boundaries. Note that this is now a global condition.
I am already working on it in WED to update it as much as possible, although is very complete unlike other default Colombian airports, but still would be nice to fix the dsf directly to continue using the runway follows land contours feature (would be even great if some day Ben adds the functionality to edit the ground levels directly from WED). Thanks for the comment
It is possible to change the runway numbers in X-Plane. Please use World Editor to rename or redraw the runways, then upload the corrected version to the Gateway so it can be included in a future update.
1: I was trying to fill a Flight Plan in the SF50 G1000 panel for making a route in SKRG José María Cordova - Rionegro, and fly GPS. But when I tried to introduce the departure procedure, an error appeared, (Attached file Nº001) saying that there is missing waypoint RWY01, for this reason I can't introdouce any procedure in my G1000 Flight plan.
2: There is and old information about this airport (SKRG José María Cordova - Rionegro), you have RWY36 and RWY18, and many years ago these runways were changed by RWY01 and RWY19 for magnetic declination (Attached File Nº002).
3: Many international and important airports have not an infraestructure. for example, SKBO Bogotá - El dorado Is the most important airport in Colombia, and it does not have enough gates, airfields, taxiway lines, terminal area, basicly it is an empty field with two runways, also the SKBO airports is considered by Xplane as an small airport, becouse when I try to call groud services, a message says:"Try a biggest airport for services" and this one is the biggest in Colombia. (Attached file Nº003). And there are many other with this problem too, like SKRG José María Cordova (International Airport and one with the highest traffic rate in colombia) that do not have any infraestructure. Also SKCG, SKCL, SKBQ, SKMR.
4: Many chart procedure names are wrong. For example, in SKBO SID (standard instrument departures) charts, there are some procedures, like: ZIP1D, ABL1K, BOGU1C KAMI1C, SILE1D, BOGU6A, ABL1A, KAMI3A, SILE9A, ABL6E, EVRA3B, ZIP3H, ZIP1C(Those are the original procedure names stablished by Colombian goverment for SKBO - El dorado Airport, you can find all procedures for all Colombian airports here: http://www.aerocivil.gov.co/servicios-a-la-navegacion/servicio-de-informacion-aeronautica-ais/aerodromos ), But in Xplane 11 those procedures have different names, like: ABL2F, ABL2G, ABL5E, BOGU5A, BOGU5B, KAMI1A, KAMI5B, and many others (Attached File Nº004) and many other procedures. Basicly mayor of all procedure names in Xplane does not match with real procedure names. It just does not happend in this airport, its in every colombian airport, all procedures names (SID's, STAR's, IAC's) are bad wroten.
steps to found bugs:
First problem:
1- Go to SKRG José María Cordova - Rionegro using SF50 Aircraft.
2- In the right G1000 glass panel go to "FPL" Button and press it.
3- After that press "PROC" Button.
4- After that press "ENT" Button.
5- You will see an error message (Attached file Nº001)
Second Problem:
1- Go to SKRG José María Cordova - Rionegro Using any aircraft (it doesn't matter wich one)
2- Go to the SKRG runway
3- You will see in the Touch Down Zone(TDZ) abbreviations
RWY36 and RWY18.
Third problem:
1- Just go SKBO Bogotá - El dorado, and move the camera away for having a wide angle and you could see all the airport. do it too with the other airports mentioned above.
Fourth problem:
1- Go to SKBO El Dorado - Bogotá using SF50 Aircraft.
2- In the right G1000 glass panel go to "FPL" Button and press it.
3- After that press "PROC" Button.
4- Using the selector knob, look for "Select departure" option and press "ENT" Button
5- There you will see all procedures (That are wrong wroten)
6- Go to: "" http://www.aerocivil.gov.co/servicios-a-la-navegacion/servicio-de-informacion-aeronautica-ais/Documents/12%20SKBO.pdf "" there you will found all real procedure names.
The gateway only really deals with your airport issues. Charts and Procedures are another issue entirely. You can actually subscribe to a service such as Navigraph which will allow you to download all the current navigation every time a new cycle is issued. You can then load this in to X-Plane to get what is actually in the world.
As for your airport concerns, I believe you are using an older version of the airport. I have already uploaded an update that fixes some of your concerns. (I actually made some more corrections today based on some new rules for the gateway). These updates you need to download and install manually. Otherwise, you have to wait for the next release of X-Plane where they will include all the approved airport updates users have submitted. My update did not make the last release.
tha platform have a noticeable inclination and the taxiway A to rwy 01 have 2 big hills
Jennifer Roberts December 11, 2015 2:02 PM
It appears that this scenery could use a bit of work. Adding an airport boundary might help smooth the bumps some, and an exclusion zone would remove trees from the taxiway.
Otherwise, you can try UNchecking "Runway follows land contours". After this action quit and restart X-Plane. When you do this you will return to flat land areas a bit inside the Scenery's airport boundaries. Note that this is now a global condition.
DGUERRERO December 11, 2015 4:17 PM
I am already working on it in WED to update it as much as possible, although is very complete unlike other default Colombian airports, but still would be nice to fix the dsf directly to continue using the runway follows land contours feature (would be even great if some day Ben adds the functionality to edit the ground levels directly from WED). Thanks for the comment
bkeith April 16, 2018 8:14 PM
Cleaned up. Can be closed.
Almost two years ago the numbers of this airport had been changed and into x-plane was not possible to change the runway numbers from 36/18 to 01/19
Jennifer Roberts June 29, 2016 10:06 AM
It is possible to change the runway numbers in X-Plane. Please use World Editor to rename or redraw the runways, then upload the corrected version to the Gateway so it can be included in a future update.
bkeith April 16, 2018 8:15 PM
Corrected. Can be closed.
GPS procedures could not be loaded at SKRG due to one missing runways 01/19
bkeith April 16, 2018 8:15 PM
Corrected. Can be closed.
Jennifer Roberts February 23, 2021 3:57 PM
Closing reports that were last updated 1 year ago or more in bug base clean up. These are most likely fixed due to Gateway scenery cuts in that time.
1: I was trying to fill a Flight Plan in the SF50 G1000 panel for making a route in SKRG José María Cordova - Rionegro, and fly GPS. But when I tried to introduce the departure procedure, an error appeared, (Attached file Nº001) saying that there is missing waypoint RWY01, for this reason I can't introdouce any procedure in my G1000 Flight plan.
2: There is and old information about this airport (SKRG José María Cordova - Rionegro), you have RWY36 and RWY18, and many years ago these runways were changed by RWY01 and RWY19 for magnetic declination (Attached File Nº002).
3: Many international and important airports have not an infraestructure. for example, SKBO Bogotá - El dorado Is the most important airport in Colombia, and it does not have enough gates, airfields, taxiway lines, terminal area, basicly it is an empty field with two runways, also the SKBO airports is considered by Xplane as an small airport, becouse when I try to call groud services, a message says:"Try a biggest airport for services" and this one is the biggest in Colombia. (Attached file Nº003). And there are many other with this problem too, like SKRG José María Cordova (International Airport and one with the highest traffic rate in colombia) that do not have any infraestructure. Also SKCG, SKCL, SKBQ, SKMR.
4: Many chart procedure names are wrong. For example, in SKBO SID (standard instrument departures) charts, there are some procedures, like: ZIP1D, ABL1K, BOGU1C KAMI1C, SILE1D, BOGU6A, ABL1A, KAMI3A, SILE9A, ABL6E, EVRA3B, ZIP3H, ZIP1C(Those are the original procedure names stablished by Colombian goverment for SKBO - El dorado Airport, you can find all procedures for all Colombian airports here: http://www.aerocivil.gov.co/servicios-a-la-navegacion/servicio-de-informacion-aeronautica-ais/aerodromos ), But in Xplane 11 those procedures have different names, like: ABL2F, ABL2G, ABL5E, BOGU5A, BOGU5B, KAMI1A, KAMI5B, and many others (Attached File Nº004) and many other procedures. Basicly mayor of all procedure names in Xplane does not match with real procedure names. It just does not happend in this airport, its in every colombian airport, all procedures names (SID's, STAR's, IAC's) are bad wroten.
steps to found bugs:
First problem:
1- Go to SKRG José María Cordova - Rionegro using SF50 Aircraft.
2- In the right G1000 glass panel go to "FPL" Button and press it.
3- After that press "PROC" Button.
4- After that press "ENT" Button.
5- You will see an error message (Attached file Nº001)
Second Problem:
1- Go to SKRG José María Cordova - Rionegro Using any aircraft (it doesn't matter wich one)
2- Go to the SKRG runway
3- You will see in the Touch Down Zone(TDZ) abbreviations
RWY36 and RWY18.
Third problem:
1- Just go SKBO Bogotá - El dorado, and move the camera away for having a wide angle and you could see all the airport. do it too with the other airports mentioned above.
Fourth problem:
1- Go to SKBO El Dorado - Bogotá using SF50 Aircraft.
2- In the right G1000 glass panel go to "FPL" Button and press it.
3- After that press "PROC" Button.
4- Using the selector knob, look for "Select departure" option and press "ENT" Button
5- There you will see all procedures (That are wrong wroten)
6- Go to: "" http://www.aerocivil.gov.co/servicios-a-la-navegacion/servicio-de-informacion-aeronautica-ais/Documents/12%20SKBO.pdf "" there you will found all real procedure names.
bkeith May 24, 2018 6:19 AM
Greetings Rafael,
The gateway only really deals with your airport issues. Charts and Procedures are another issue entirely. You can actually subscribe to a service such as Navigraph which will allow you to download all the current navigation every time a new cycle is issued. You can then load this in to X-Plane to get what is actually in the world.
As for your airport concerns, I believe you are using an older version of the airport. I have already uploaded an update that fixes some of your concerns. (I actually made some more corrections today based on some new rules for the gateway). These updates you need to download and install manually. Otherwise, you have to wait for the next release of X-Plane where they will include all the approved airport updates users have submitted. My update did not make the last release.
Cheers,
Brendan Keith
Jennifer Roberts February 23, 2021 3:58 PM
Closing reports that were last updated 1 year ago or more in bug base clean up. These are most likely fixed due to Gateway scenery cuts in that time.
When will you be able to download this latest version?
is the conventional skrg but remastered to look better?