This is not an error or issue, but Haneda Airport commenced service both ILS 16L and 16R since Mar/29/2020. Please refer https://aisjapan.mlit.go.jp/ or attached PDFs.
You need to use an updated navigational data set to see new navigational data. These sets can be purchased from Navigraph or Aerosoft. The navigational data contained in Xplane by default is old and will not change.
Hi, Thanks for adjusting the runway length of 16L and 16R. After downloaded and tried the approach, I found the PAPI placement is a little north than actual. Could you please check the position of PAPI lighting? Thank you.
Due to technical limitations, the location of the touchdown-zone markings on the runways are not always where they are in reality. The runway texture will be “stretched” to fit the exact runway length, that is why the markings can be offset. The location of the PAPIs is accurate (according to sat pictures) and if you move them to coincide with the markings in XPlane, they will not line up with the ILS anymore.
There should be a better technology in the next version of Xplane for this…for now we have to live with this.
I have to backpedal a bit on my previous statement! You were right, I forgot to also move the PAPI for 16L - done that and uploaded.
While what I said previously (about the markings) is still true, it should be a lot closer (and coincide with the new displaced threshold much better) to the touchdown point.
how does one add LF2 door gate function with latest update of this scenary, with x-planes default scenary gate function? does it need to be with autogate library or SAM libraries to make it work with x-planes default SHIFT+G function? or does xplane have its own gate librarry in WED already?
You must be logged in to participate in the discussion
Taxi network non functional:
Previous revision 44972 did not have that problem.
Hi designers!
This is not an error or issue, but Haneda Airport commenced service both ILS 16L and 16R since Mar/29/2020. Please refer https://aisjapan.mlit.go.jp/ or attached PDFs.
Thank you,
Jan Vogel April 26, 2021 4:13 AM
You need to use an updated navigational data set to see new navigational data. These sets can be purchased from Navigraph or Aerosoft. The navigational data contained in Xplane by default is old and will not change.
m_kwmr April 27, 2021 6:36 AM
Hello Jan, Thank you so much for your instruction. I will try for update the nav data on by own.
Current Haneda Runways of 16L/34R and 16R/34L are both shortened. Please check and modify the airport. Thank you.
Jan Vogel June 25, 2021 8:15 AM
This report is correct. I will add the displaced thresholds for 16 l/R and 34R.
Jan Vogel June 26, 2021 9:57 AM
Fixed airport and uploaded it to the Gateway.
m_kwmr June 26, 2021 7:05 PM
Thanks for update!!
Hi, Thanks for adjusting the runway length of 16L and 16R. After downloaded and tried the approach, I found the PAPI placement is a little north than actual. Could you please check the position of PAPI lighting? Thank you.
Jan Vogel June 28, 2021 6:12 AM
Due to technical limitations, the location of the touchdown-zone markings on the runways are not always where they are in reality. The runway texture will be “stretched” to fit the exact runway length, that is why the markings can be offset. The location of the PAPIs is accurate (according to sat pictures) and if you move them to coincide with the markings in XPlane, they will not line up with the ILS anymore.
There should be a better technology in the next version of Xplane for this…for now we have to live with this.
m_kwmr June 28, 2021 7:07 AM
OK, thanks a lot for improving RJTT. Really appreciated.
Jan Vogel June 28, 2021 9:51 AM
I have to backpedal a bit on my previous statement! You were right, I forgot to also move the PAPI for 16L - done that and uploaded.
While what I said previously (about the markings) is still true, it should be a lot closer (and coincide with the new displaced threshold much better) to the touchdown point.
m_kwmr June 29, 2021 1:02 AM
Hi Jan, I just checked newest upload and it is what I expected! Thank you so much for the improvements!
how does one add LF2 door gate function with latest update of this scenary, with x-planes default scenary gate function? does it need to be with autogate library or SAM libraries to make it work with x-planes default SHIFT+G function? or does xplane have its own gate librarry in WED already?