Goodman74
commented
in reference to scenery pack
79004on July 17, 2020 4:44 AM
Very strange types or airplanes - US Air force on the Russian Civilian airdrome.
On Map (i checked on XP 10.50) the contours of airdrome not fully corresponded to 3D objects ("Vnukovo" 3 is absent).
The Planes were in the "Laminar Library" under
"Military" - "heavy_d_.obj". I thought I could use anything that came from the "Laminar Library".
lib_airport/aircraft. I thought I'd be able to use them. Should I never install them again?
I sent in a second copy of this airport because I made mistakes in the first one. What should I do?
Goodman74
commented
in reference to scenery pack
79004on July 18, 2020 12:58 AM
Hi, Bocephus! It's only my comment with my IMHO.
The main problem is the "Vnukovo" 3 is absent on map.
FYI I checked the version 79004 on XP 10.50, may be on 11.x problem with "Vnukovo3" map is absent.
I'm really getting confused. Now I think you're talking about the actual map. In the "Gateway Scenery Map" that shows maps all over the world I'm always clicking on the little orange thing's with a star in them to check the airport
to see if I want to check it out and this one is close to Moscow and on the top of the screen, (UUWW) Vnukuvo and below that it says " This version included in Global Scenery since x-plane v11.20". I then got on this website and where I type the Search Airports, I typed in UUWW and it came up and I checked it out and when I got on a runway, nothing but hills and I checked "Flatten" and that flattened the whole map and that's when I started working on it. About 3 or 4 other people checked this map out also and apparently they had alot of trouble but I think I made it OK. "Litjan" got it approved on 8-29-17 and "Kareem" got it approved on 2-2-18. And I sure don't understand how they got it approved and it being in the shape it was when I checked it out on 7-9-20.
When you press "m" in XPlane you see the map, which doesn't corresponded to aerodrome objects you see from airplane (absent big part of Vnukovo 3)
I additionally check that version by WED, the set correctly .
I think problem in XPlane, It doesn't use the current aerodrome boundary when it showing the "Map"
I found the problem - the Aerodrome Designer forgot put the taxiway objects on territory where he put Hangars & airplanes (on map showing taxiway for Vanila version of this aerodrome, which was lesser).
Fixed airport was uploaded and should be included with next XPlane update that incorporates a scenery injection.
Goodman74
commented
in reference to scenery pack
79004on July 18, 2020 10:57 PM
I checked at XP 11 the last your version.
As i wrote:
1 My recommendation (IMHO):
change the airplane US Air Force on another
airplanes FedEx & US Air Force placed in Hangars wrongly.
2 Main problem - When you press "m" in XP you see the map, which doesn't corresponded to aerodrome objects you see from airplane (absent big part of Vnukovo 3)!
I made Issue report
!!! I additionally check you version by WED, in your versions you set correctly aerodrome boundary.
I think problem in XP, It doesn't use the current aerodrome boundary when it showing "Map in XP"
P.S>
I didn't understand that you write regarding "on a runway, nothing but hills"? As i Wrote, I set your last version as custom sceneries and all ok except that i wrote beyond.
FYI The "Litjan" & "Kareem" didn't look your version they checked previous.
Goodman74
commented
in reference to scenery pack
79004on July 19, 2020 2:32 AM
Hi, Bocephus!
I found a problem.
You (or designers before you) forgot put the taxiway objects on territory where you put Hangars & airplanes (on map showing taxiway for Vanila version of this aerodrome, which was lesser).
If I right understood the Great WED Teachers - Jan Vogel, the taxiways (or runways) must be anywhere where airplane can be.
XPlane Developers make great "Map engine" it automatically rebuild aerodrome representation corresponds to current runways & taxiways.
Geniuses
Very strange types or airplanes - US Air force on the Russian Civilian airdrome. On Map (i checked on XP 10.50) the contours of airdrome not fully corresponded to 3D objects ("Vnukovo" 3 is absent).
The Planes were in the "Laminar Library" under "Military" - "heavy_d_.obj". I thought I could use anything that came from the "Laminar Library". lib_airport/aircraft. I thought I'd be able to use them. Should I never install them again? I sent in a second copy of this airport because I made mistakes in the first one. What should I do?
Hi, Bocephus! It's only my comment with my IMHO. The main problem is the "Vnukovo" 3 is absent on map. FYI I checked the version 79004 on XP 10.50, may be on 11.x problem with "Vnukovo3" map is absent.
I'm really getting confused. Now I think you're talking about the actual map. In the "Gateway Scenery Map" that shows maps all over the world I'm always clicking on the little orange thing's with a star in them to check the airport to see if I want to check it out and this one is close to Moscow and on the top of the screen, (UUWW) Vnukuvo and below that it says " This version included in Global Scenery since x-plane v11.20". I then got on this website and where I type the Search Airports, I typed in UUWW and it came up and I checked it out and when I got on a runway, nothing but hills and I checked "Flatten" and that flattened the whole map and that's when I started working on it. About 3 or 4 other people checked this map out also and apparently they had alot of trouble but I think I made it OK. "Litjan" got it approved on 8-29-17 and "Kareem" got it approved on 2-2-18. And I sure don't understand how they got it approved and it being in the shape it was when I checked it out on 7-9-20.
When you press "m" in XPlane you see the map, which doesn't corresponded to aerodrome objects you see from airplane (absent big part of Vnukovo 3)
I additionally check that version by WED, the set correctly .
I think problem in XPlane, It doesn't use the current aerodrome boundary when it showing the "Map"
Goodman74 July 18, 2020 11:33 PM
"set correctly" = "aerodrome boundary set correctly"
Goodman74 July 19, 2020 2:27 AM
I found the problem - the Aerodrome Designer forgot put the taxiway objects on territory where he put Hangars & airplanes (on map showing taxiway for Vanila version of this aerodrome, which was lesser).
Jan Vogel March 10, 2021 9:48 AM
Fixed airport was uploaded and should be included with next XPlane update that incorporates a scenery injection.
I checked at XP 11 the last your version. As i wrote:
1 My recommendation (IMHO):
2 Main problem - When you press "m" in XP you see the map, which doesn't corresponded to aerodrome objects you see from airplane (absent big part of Vnukovo 3)!
I made Issue report !!! I additionally check you version by WED, in your versions you set correctly aerodrome boundary.
I think problem in XP, It doesn't use the current aerodrome boundary when it showing "Map in XP"
P.S> I didn't understand that you write regarding "on a runway, nothing but hills"? As i Wrote, I set your last version as custom sceneries and all ok except that i wrote beyond.
FYI The "Litjan" & "Kareem" didn't look your version they checked previous.
Hi, Bocephus! I found a problem. You (or designers before you) forgot put the taxiway objects on territory where you put Hangars & airplanes (on map showing taxiway for Vanila version of this aerodrome, which was lesser).
If I right understood the Great WED Teachers - Jan Vogel, the taxiways (or runways) must be anywhere where airplane can be.
XPlane Developers make great "Map engine" it automatically rebuild aerodrome representation corresponds to current runways & taxiways. Geniuses
pls fix stands according scheme/ THNKS
Jan Vogel June 25, 2025 3:13 PM
This requires a substantial overhaul by volunteer gateway artists.
how soon ?
there is no marking